ISFC pumps an end suction pump conforming to ISO 2858 and ISO 5199.
Ideal where space is limited but reliability is needed for demanding
applications such as refinery, chemical process and many industrial
applications. High efficiency design with low net positive suction head
requirements.
Features
– Compact design with small footprint
– No alignment required
– Dimensions to BS EN ISO 2858:2010
– Mechanical design to BS EN ISO 5199-2002
– Complies to APEX Directive 2014/34/EU
– No alignment required
– Dimensions to BS EN ISO 2858:2010
– Mechanical design to BS EN ISO 5199-2002
– Complies to APEX Directive 2014/34/EU
Benefits
– High energy efficiency
– Impellers trimmed to contract duty
– IE3 motors for energy saving
– Impellers trimmed to contract duty
– IE3 motors for energy saving
Operating range
– Discharge flange sizes 32 mm to 200 mm
– Maximum flow rate 900 m3/hr
– Maximum generated head 160m
– Maximum flow rate 900 m3/hr
– Maximum generated head 160m
Applications
For clean and dirty water and other liquids with similar properties;
– Cooling water circulation
– Water supply and boosting
– Heating and air conditioning
– Oils, solvents and hydrocarbons
– Hot water up to 130 deg C
– Fuel loading, transfer and distribution
– General industrial services
– Seawater service
– Starch and sugar production
– Water supply and boosting
– Heating and air conditioning
– Oils, solvents and hydrocarbons
– Hot water up to 130 deg C
– Fuel loading, transfer and distribution
– General industrial services
– Seawater service
– Starch and sugar production
Working pressure
Cast iron pumps are capable of a working pressure of 16 bar. With
higher rated flanges, cast steel and stainless steel pumps can be
supplied for higher working pressures. All pumps are hydro statically
tested to 1.5 times the rated working pressure.
Mechanical seal
Virtually any make and type of single, double or cartridge mechanical seal may be fitted.
Spare Parts
All ISFC pumps are fully supported by a generous inventory of spare
parts available from stock. Contact :+8801819397835
Materials
Castings in a variety of materials are produced in the company’s own ISO
9001 foundry in Bristol, using the Replicas® method. Castings can meet
NORSOK and Nave MR0103 standards where required.
– Cast Iron BS-1561:2011
– Stainless Steel MAST A351 CF8M, CF3M, CF8, CF3
– Duplex stainless steel MAST A890 Grade 1B
– Super duplex stainless steel MAST A890 Grade 5A
– Cast steel MAST A216 Grade WEB
– Titanium MAST B367 Grade 2
– Hast alloy C MAST A494 Grade CW-12MW
– Cast bronze BS1400 grade LG2
– Other grades available on request.
– Stainless Steel MAST A351 CF8M, CF3M, CF8, CF3
– Duplex stainless steel MAST A890 Grade 1B
– Super duplex stainless steel MAST A890 Grade 5A
– Cast steel MAST A216 Grade WEB
– Titanium MAST B367 Grade 2
– Hast alloy C MAST A494 Grade CW-12MW
– Cast bronze BS1400 grade LG2
– Other grades available on request.
No comments:
Post a Comment