Capra Right Multiphase high-pressure centrifugal pump

Capra Right Multiphase high-pressure centrifugal pump

grey cast iron, spheroidal graphite iron and bronze

temperature up to 90°C high efficiency packing mechanical seal.

MULTISTAGE PUMP

Description

D series horizontal multistage pump is a side suction (or vertical suction), vertical delivery, ring section type centrifugal pump with diffuser type casing.  Available in various sizes, hydraulics and material combinations, the multistage pump is suited for a wide range of site conditions, including clear water, neutral mineral water with particles occupied less than 1.5% and size less than 0.5mm, corrosive liquid without solid particles etc, which temperature is 0℃- 105℃.

3/4 HP Economy Shallow Well Jet Pump with built-in ejector

Product Details

High tensile bodies with larger water cavities for fast, easy priming

Separate priming ports enable quick water fill and the fast evacuation of air

Buna-N Quadraseal between pump case and motor bracket

Available at chattogram  +8801819397835

Sparkle SJP-375PC Auto Jet Pump 50 L/Min, 34m Lift (5 Taps)

Product Description

One of the most important commodities for your home or business is your water supply. It creates the need for a pump and one of the best selections you can make is the Sparkle Pumps SJP-375PC Automatic Water Jet Pump. This is a water jet pump that has all the horsepower necessary to carry the water supply you need for buildings ranging in size from one to two storey buildings. You have the option of up to five taps which means no matter where you are in the dwelling you will have access to your clean or rain water as needed.

Centrifugal Pump,

General Descriptions

Brand

Marelli

Product Series

Squirrel Cage Induction motor

General Specifications

Rated outputs and effi ciency values are in accordance with IEC 60034-30-1;

all parameters are measured in accordance with IEC 60034-2-1;

Jet Pumps

What is a jet pump? It is a centrifugal pump with a jet assembly and an impeller diffuser.There are 3 variants namely, shallow, deep and convertible. Our TRADEpower Pumps are of the shallow well variant. This means that the shallow well adapter containing the jet assembly is connected to the pump casing.

Clarke PSV1A 1¼" 335W 140Lpm 5.8m Head Dirty Water Submersible Pump (230V)

The Clarke PSV1A Water Pump is designed mainly for heavy responsibility applications. This robust, powerful water pump is perfect for rapidly shifting each smooth and dirty water; in fact, it will pass solid.

Centrifugal Pump Impeller

Impellers for a range of sorts of pumps are

anufactured  thru us in “C.I, CAST STEEL, S.S 316, S.S 304, S.S 410, BRONZE (G.M), Ph. RONZE, and Alloy20.” Used in more than one industrial applications, the Pump Impeller is liked for its efficacious and indispensable performance. Manufactured from extremely good remarkable uncooked materials, the Pump Impeller is on hand in one-of-a-kind grades and sizes as per the desires of our honored customers. We are believed as one of the famed Pump Impeller Manufacturers & Wholesalers from India.

Centrifugal Pump Impeller

Product Description

MaterialStainless Steel

Closing TypeSemiclosed 

Impellers TypeSingle-Suction 

Size/ Dimension 22 inch

Centrifugal Pump Impeller

Product Description

MaterialSS

ApplicationIndustrial

ShapeRound

Being one of the renowned corporations in the industry, we are decidedly involved in imparting a brilliant array of Centrifugal Pump Impeller.
Available at chattogram  +8801819397835

centrifugal pump

Descriptions

Used for: water supply, cleaning sets, stress boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications.

Centrifugal Pump Impeller

Product Description

TypeOpen, Partially open, Semiclosed, Closed

MaterialStainless Steel

ImpellerstypeSingle-suction

GradeSS304

TVXC Sewage Pumps

USES - The TVXC are professional pumps with a solid iron impeller suitable deal with thick waters of max. 50° C. in cesspools, ditches, sewers, etc. The TVXC pumps can also take care of water with suspended solids of max. 25 mm. They are also appropriate to expell used industrial and home waters.

WQ Sewage Pumps

USES - The WQ are expert pumps with a forged iron impeller appropriate cope with thick waters of max. 50°C in cesspools, ditches, sewers, etc. The WQ pumps can also handle water with suspended solids of max. 25 mm. They are also appropriate to expell used industrial and home waters.

Submersible Drainage pump

USES - The TPS series is designed to cope with clear or slightly soiled water with temperature not exceeding 50° C. It is suitable to a variety of uses such as: draining basements, boats, cisterns, pools, etc.

Centrifugal Pump

IH Stainless Steel Centrifugal Pump

IH-type pump is a horizontal single-stage, single-suction chemical pump for industrial, agricultural and drainage. it is mainly used for transferring various corrosive liquids, and liquids containing a small amount of particles. The production is in strict accordance with ISO2858.

Standardized Centrifugal Pumps

USES - These centrifugal electric water pumps with one IMPELLER are built-in compliance with DIN24255 specifications. They are suitable to handle clean or slightly doudy, noncorrosive water not exceeding 50°C temperature for DOMESTIC, AGRICULTURAL and INDUSTRIAL applications.

Low Lift pumps (high flow) - THF-6C

USES - Most suitable to transfer high volume of water (Temperature not exceeding 50° C.) against low heads. Possibility of pumping cloudy water as well as detergents and solvents by simply changing the seal type. ideal for flood irrigation with suction from canals, rivers, etc.

Low Lift pumps (medium flow) - THF-5B

USES - Most suiltable to transfer high volumes of water (Temparature not exceeding 50° C.) against low heads. Possibility of pumping cloudy water as well as detergents and solvents by simply changing the seal type. Ideal for flood irrigation with suction from canals, rivers, etc.

Low Lift pumps with open impeller - TGA-1A

USES - These open-type impeller pumps have been designed to handle fairly high volumes of water against low heads and with reduced power consumption. The brass impeller is of open type allowing pumping of liquids with high percentage of impurities without the risk of clogging the impeller.

Centrifugal Pumps

USES - Ideal for domestic use. Most suitable as water booster sets, boiler-feed pumps, tank filling, car washing, fountain feeding, garden watering, etc. Water pumped not to exceed 50° C.

Tow-stage Centrifugal Pumps

USES - These centrifugal electric water pumps with two IMPELLER made of BRASS are suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50°C temperature. Ideal as water booster sets working under the most sever conditions. Most suitable in domestic and horticultural applications, tank filling in industrial units, water pressurization in general, heavy duty high pressure washing, etc.

Standarized single Impeller Pumps

USES - These centrifugal electric water pumps with one IMPELLER made of BRASS are built-in compliance with DIN 24255 specifications. They are suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50°C temperature for DOMESTIC, AGRICULTURAL and INDUSTRIAL applications.

CP single impeller Pumps

USES - These centrifugal electric water pumps with one IMPELLER of BRASS are suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50° C. temperature. They are ideal to provide water supply to domestic dwellings, farms, industrial units etc. They are also most suitable as water booster sets, boiler-feed pumps, tank filling, car washing, fountain feeding, agricultural and horticultural applications, etc.

Self-Priming Deep Well Pumps

USES - "JDW" pumps are used to pump water from wells with a static level exceeding 15 metres depth, provided the ejector unit which is being supplied with each pump is correctly placed inside the well below water level. suction lifts from 15 to 45 feet can be obtained depending on motor size.

Self-Priming Jet Pumps

USES - BRASS IMPELLER self-priming JET pumps of new and compact design incorporating a special (patented) priming system that allows for excellent performance. Suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50° C. Possibility of sucking from a depth of 9 metres priming well even in presence of water with gas bubbles, It is recommended to install a foot valve or gate valve on suction inlet.

Self-Priming Jet Pumps

USES - These self-priming ejector type pumps with BRASS IMPELLER are suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50° C. temperature. Particularly suitable as shallow well pumps in areas where the well level is subject to seasonal changes. They can suck from a maXImum depth of 9 metres and prime well even in presence of water with gas bubbles. It is recommended to install a foot valve or gate valve in suction inlet.

Gazi Peripheral Pumps

USES - These self-priming ejector type pumps with BRASS IMPELLER are suitable to handle clean or slightly cloudy, non-corrosive water not exceeding 50° C. temperature. Particularly suitable as shallow well pumps in areas where the well level is subject to seasonal changes. They can suck from a maximum depth of 9 metres and prime well even in presence of water with gas bubbles. It is recommended to install a foot valve or gate valve in suction inlet.

Gazi Peripheral Pumps

USES - Ideal for domestic use. Most suitable as water booster sets, boiler-feed pumps, tank filling, car washing, fountain feedings, garden watering, etc. Liquid Temperature not to exceed 50° C

ISF Pump

 ISF pumps an end suction pump conforming to ISO 2858 and ISO 5199. Idea pumping solution for demanding applications such as refinery, chemical process and many industrial applications. High efficiency design with low net positive suction head requirements.

Mart Pump

Full product description

This Clarke heavy duty submersible water pump is suitable for use with clean or dirty water, making it ideal for draining ponds, pools and building excavations. This water pump has been designed with a float switch which automatically turns the pump off when level drops and a corrosion resistant stainless steel casing and cast iron base for long reliable service.

HP/HV Pump

Horizontal and vertical high pressure multistage centrifugal pumps, suitable for industrial applications even with highly aggressive fluids. Max flow rates over 1200 m3hr Head up to 900m.

ISFC pump

ISFC pumps an end suction pump conforming to ISO 2858 and ISO 5199. Ideal where space is limited but reliability is needed for demanding applications such as refinery, chemical process and many industrial applications. High efficiency design with low net positive suction head requirements.

TD pump

TD pumps offers one of the broadest ranges of pumps with discharge sizes from 32mm to 250mm. The Back pull out design for ease of maintenance and conforms to DIN 24255 standard. Capable of handling large range of liquids and compatible with a Vortex impeller.